Differential Pressure Flow Meter

Differential Pressure Flow Meter

We are one of the best leading manufacturers and suppliers of Gas Flow Meters and Steam Flow Meters. We are engaged in imparting a various type of Flow Meters that is evolved using superior technology and satisfactory quality of raw material. These are available in various specifications to fulfill the requirements of various industrial applications.

GFM (Gas Flow Meter) series flow meter for measuring flow rates of Bio Gas, LPG, compressed air and other compressed gases. SFM (Steam Flow Meter) series flow meter for measuring flow rates of steam (saturated & superheated), mass flow rates of boiler feed water in closed pipes. The digital gas flow meter is suited for a wide range of applications where affordability, reliability & ruggedness are of prime importance.

These come with two versions which are as follows-

WITH DENSITY COMPENSATION
WITHOUT DENSITY COMPENSATION
GFM (Gas Flow Meter) Series is most suitable for compressible fluids, Which are difficult to measure because of variations in their pressure & temperature.

SFM (Steam Flow Meter) series is most suitable in Chemical / Pharmaceutical, Petrochemical, and Fertilizers Sectors.

Features

  • Size: 1 inch to 8 inch
  • Type of flow element: Differential flow element
  • Accuracy: ±2.5% of actual reading
  • Typical turndown: 10:3
  • Density compensation: Online monitoring and compensation of density
    Communication protocol: MODBUS, RTU
  • Communication port: RS485, RS232 (optional)

Applications

  • Engineering & Automation
  • Textiles
  • Chemical/pharmaceutical
  • Food & Drugs
  • Petrochemicals
  • Fertilizers
  • Steel/ Aluminum
  • Sugar Factories/Distilleries

Product Details

Brand manas microsystems
Mounting Wall/Panel
Max depth 185mm
Accuracy ±0.25% of Full Scale
Pressure unit Kg/cm2 (g) or Bar (g)
Steam pressure 1 to 100 kg/cm2 (a) max
Steam temperature 100°C to 600°C max for superheated steam & 100°C to 309.6°C max for saturated steam
Enclosure Al Die-Cast/ABS plastic
Power supply 85 to 265V AC,50Hz,single phase
Comm. Port RS485 std., RS232 (Optional)
Density Compensation Online monitoring and compensation of density
Dimensions WM Type 310(L)x160(W)x105(D)
Dimension PM Type Bezel-144mm(H)x72mm(W)culout-138mm(H)x68mm(W)

Product Details

Brand manas microsystems
Mounting Wall/Panel
Max depth 185mm
Accuracy ±0.25% of Full Scale
Pressure unit Kg/cm2 (g) or Bar (g)
Steam pressure 1 to 100 kg/cm2 (a) max
Steam temperature 100°C to 600°C max for superheated steam & 100°C to 309.6°C max for saturated steam
Enclosure Al Die-Cast/ABS plastic
Power supply 85 to 265V AC,50Hz,single phase
Comm. Port RS485 std., RS232 (Optional)
Density Compensation Online monitoring and compensation of density
Dimensions WM Type 310(L)x160(W)x105(D)
Dimension PM Type Bezel-144mm(H)x72mm(W)culout-138mm(H)x68mm(W)

Product Details

Orifice flow meter consists of three sections Inlet Section, Orifice Plate, Outlet Section.

Inlet Section: It is an inlet pipe connection extended straight and part of the same diameter for an end connection that serves to the incoming flow of fluid, steam and gas, and where we measure the inlet pressure.

Orifice Plate: An Orifice Plate is positioned in the middle of the Inlet and Outlet Sections to form a pressure dip and hence do the flow measurement.

Outlet Section: Like the inlet section it is an extended straight segment part of the same bore as that of the outlet pipe for an end connection for an outgoing flow of fluid or gas where we measure the pressure of the media at discharge.

The material of construction: The Orifice plates in the Orifice meter, in general, are made up of stainless steel of varying grades like SS 304, 316.
Orifice flow meter size and shapes: Orifice flow meters are constructed in various forms depending on their application-specific requirement i.e., shape, size, and location of holes on the Orifice Plate.